26_ care and cleaning
care and cleaning
CLEANING THE CONDENSER ASSEMBLY
1. Open the condenser compartment cover.
2. Unlock the fixer condenser.
3. Remove the condenser.
4. Clean the condenser completely under the tap letting water
to flow through.
• Since the drying performance may be degraded if you do not clean the condenser after
a specified period of use, clean the condenser at the specified cleaning interval.
• Clean it once a month.
• When assembling the condenser after cleaning it, make sure to that the fixer condenser
is set to the lock position.
CAUTION
Fixer Condenser
SDC18809-02805C-05_EN.indd Sec10:26SDC18809-02805C-05_EN.indd Sec10:26 2013-03-29 11:00:502013-03-29 11:00:50
To Next Page
Loading...
