Samsung SDC3D809 - Information Codes Explained

30_ troubleshooting
troubleshooting
INFORMATION CODES
Information codes may be displayed to help you better understand what is occurring with your Dryer.
ERROR DISPLAY MEANING SOLUTION
tE2
Clogged filter case is restricted. Clean the filter case or condenser.
If the problem continues call for service.
tE4
dE
Running the dryer with door open Close the door and then restart.
If the problem continues call for service.
dF
Door is not closing properly Call for service.
bE
Button stuck for more than 30 secs Make sure a button is NOT being
pressedcontinuously. Try restarting the cycle.
If the problem continues, call for service.
hE
Clogged filter case is restricted.
Invalid heating Temp when running
the dryer.
Clean the filter case or condenser.
If the problem continues call for service
Et
EEPROM is not communicating
properly
Try restarting the cycle.If the problem
continues call for service.
3E
The motor does not work properly. Try restarting the cycle.If the problem
continues call for service.
5E
The water tank is full of water.
The drain pump is out of order.
Empty the water tank and start again.
If the problem continues call for service.
For any codes not listed above, or if the suggested solution doesn’t fix the problem, call your Samsung
Service Centre or local Samsung dealer.
SDC18809-02805C-05_EN.indd Sec6:30SDC18809-02805C-05_EN.indd Sec6:30 2013-03-29  11:00:502013-03-29  11:00:50