EasyManua.ls Logo

Samsung Series 5+ 540 - Connecting to a Wireless Network

Samsung Series 5+ 540
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Connecting to a Wireless Network
To connect your TV to your network wirelessly, you need a wireless router or modem and a Samsung Wireless LAN Adapter
(WIS09ABGN), which you connect to your TV's back or side panel USB jack. See the illustration below.
TVSidePanel
The LAN Port on tile Wireless IP sharer
Wall (APhaving DHCP server)
LAN Adapter or
LAN Cable (Not Supplied)
Samsung's Wireless LAN adapter issold separately and is offered by select retailers, Ecommerce sites and Samsungparts.
corn. Samsung's Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsung
recommends using IEEE 802.11N. When you play the video over a IEEE802.11B/G connection, the video may not play
smoothly.
NOTE
" You must use the "Samsung Wireless LAN Adapter" (WIS09ABGN) to use a wireless network.
* Samsung's Wireless LAN adapter is sold separately. The WIS09ABGN Wireless LAN adapter is offered by select
retailers, Ecommerce sites and Samsungparts.com.
* To use a wireless network, your TV must be connected to a wireless IP sharer. Ifthe wireless IP sharer supports
DHCP, your TV can use a DHCP or static IP address to connect to the wireless network.
* Select a channel for the wireless IP sharer that is not currently being used. Ifthe channel set for the wireless IP sharer
is currently being used by another device nearby, this will result in interference and communication failure.
* Ifyou apply a security system other than the systems listed blow, it will not work with the TV.
. If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIP-
AES (WPS2Mixed) for your AP, Samsung TVs will not support a connection in compliance with new Wi-Fi certification
specifications.
" If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button
Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in
either mode.
* Ifyour router, modem, or device isn't certified, it may not connect to the TV via the "Samsung Wireless LAN Adapter."
* Connection Methods: You can setup the wireless network connection 4 ways.
- PBC (WPS)
- Auto Setup (Using the Auto Network Search function)
- Manual Setup
- Ad-Hoc
English 29

Related product manuals