Advanced Features
Troubleshooting for Anynet+
TheTV Programcannot be
recorded.
TheTV sound is not output • Connect the optical cable between TV and the receiver.
through the receiver.
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI cable isproperly connected.
Check whether Anynet+ (HDMI-OEC) is set to On in the Anynet+ setup menu.
Search Anynet+ devices again.
You can connect an Anynet+ device usingthe HDMIcable only. Some HDMI cables may not support Anynet+
functions.
If connection is terminated because there has been a power interruption or the HDMI cable has beers
disconnected, please repeat the device scan.
Check whether the antenna jack on the recording device is properly connected.
2 English
To Next Page
Loading...
