Samsung Series 5+ 540 - Connecting to an Antenna; Plug & Play (Initial Setup)

Getting Started
When the TV is initially powered on, basic settings proceed automatically.
Connecting the power cord and antenna.
VHF/UHFAntenna
Antenna Cable (Not Supplied) ---_ _
Or
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER (b button. Plug & Play is available only when the input source is set to T_.
To return to the previous step, press the Red button.
Selecung a tanguage
Selecting Store Demo
or Home Use
Selecting an antenna
Press the A or 1!' button, then press the ENTERE_ button.
Select the desired OSD (On Screen Display) language,
Press the _ or !_ button, then press the ENTERE_ button.
• Select the Home Use mode. Store Demo Mode is for retail
environments,
• To return the unit's settings from Store Demo to Home Use
(standard): Press the volume button on the TV.When you
see the volume OSD, press and hold MENU for 5 sec.
POWER
Press the A or • button, then press the ENTERL%_ button. Select Air, Cable or Auto.
Selecting a channel
SMe;tidneg the clOck
Vtewing the HD
Connection Guide.
Enjoy your T_. Press the ENTER I_ button.
Press the A or T button, then press the ENTERE_ button. Select the channel source
to memorize. When setting the antenna source to Cable, a step appears allowing you to
assign numerical values (channel frequencies) to the channels. For more information, refer to
Channel --_Auto Program (p. 14),
_£ Press the ENTERL%_button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
• Auto: Allows you to select DST (Daylight Saving Time) mode and time zone
• Manual: Allows you to manually set the current date and time (p. 21),
The connection method for the best HD screen quality is displayed.
if You Want to Reset This Feature...
MENU rm _ Setup _ Plug & Play _ ENTERI__
English