Theproductcolorandshapemayvarydependingonthemodel.
Speakers
Power Indicator
-- Remote control sensor
SOURCE
MEb
--VOL+
VCHA
Power InCllcato _
d) tPower)
Toggles between all the available input sources. Inthe on-screen menu, use this
button as you would use the ENTERE_ button on the remote control.
Displays an on-screen menu, the OSD (on screen display) of your TV'sfeatures,
Adjusts the volume. Inthe OSD, use the --VOL÷ buttons as you would use the
and !_ buttons on the remote control,
Changes the channels. In the OSD, use the V CH A buttons as you would use the
Ir and A buttons on the remote control,
Blinks and turns off when the power is on and lights up in standby mode.
Turns the TV on or off.
Remote control sensor Aim the remote control towards this spot on the TV.
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount
of electric power is still consumed even when the power button isturned off. It is best to unplug the power cord.
English 5
To Next Page
Loading...
