What does “PIN code” mean on my Samsung Cell Phone?
The “PIN code” message appears on your Samsung Cell Phone when you are using your phone for the first time and must enter the Personal Identification Number (PIN) supplied with the SIM card, or when the PIN check feature has been enabled. To disable this feature, press the Start soft key, select Settings ? More... ? Security ? Disable SIM PIN, and enter the PIN.
What to do if my Samsung SGH-I607 says “No network coverage”?
If your Samsung Cell Phone displays “No network coverage,” “Error unable to connect. No network coverage.” or “Message sending failed”, it could be due to a lost network connection. You might be in an area with a weak signal, such as a tunnel or surrounded by buildings. Try moving to a different location and try again. Alternatively, you may be trying to access a service that you have not subscribed to. Contact your service provider for details.
Why is my Samsung Cell Phone not connecting to the internet?
If your Samsung Cell Phone is unable to connect to the Internet, first check that you have set up and are connected to an Internet service provider. Also, check if your wireless connection to your mobile service provider is switched on and the signal from the GPRS network is unobstructed. Verify with your service provider that your username and password are correct. You can also verify with your Internet service provider that the network you are trying to connect to is available, or try connecting from another PC.
What to do if Samsung Cell Phone doesn't turn on even with sufficient battery?
If the battery level on your Samsung Cell Phone seems sufficient, but the phone does not turn on, remove the battery from the phone and reinstall it. Then turn on the phone. If that doesn't work, clean the metal contacts both on the battery and on the phone. Reinstall the battery and turn on the phone.
How to fix a display that is not clear on Samsung Cell Phone?
If the display on your Samsung Cell Phone is not clear, moving to a place with different lighting should solve this problem.
Why won't my Samsung Cell Phone connect to my Bluetooth headset?
If you cannot connect to the remote Bluetooth stereo headset with your Samsung Cell Phone, ensure that the correct passkey was entered on the phone during the connection with the headset. Most Bluetooth headsets have a fixed passkey that would be mentioned in their user’s guide. You would need to enter the passkey when establishing a connection with the headset.
How to disconnect a Bluetooth device on Samsung SGH-I607 Cell Phone?
If you cannot end a Bluetooth connection on your Samsung Cell Phone, and another device is connected to your phone, you can end the connection by deactivating Bluetooth. Go to Bluetooth and deselect Turn on Bluetooth.
Why can't my Samsung Cell Phone find my Bluetooth headset?
If you cannot discover the remote Bluetooth stereo headset with your Samsung Cell Phone, be sure that the Bluetooth functionality on the phone is turned on. Also, be sure that the remote Bluetooth stereo headset is in discoverable mode and has the capability to act as a stereo headset.
Why does my Samsung SGH-I607 turn off when I plug it in?
If your Samsung Cell Phone turns off when the adapter is connected, some dust on the contacts may cause unexpected power-off or charging problems. Clean the metal contacts both on the battery and on the phone.
What to do if my Samsung SGH-I607 malfunctions?
If your Samsung Cell Phone malfunctions or does not function, try removing the battery and then replacing it. Then, turn on the phone. If the problem persists, contact a Samsung service representative.
General| Brand | Samsung |
|---|---|
| Model | SGH-I607 |
| Category | Cell Phone |
| Language | English |
To Next Page