SHR-1040/1040K USER’S MANUAL
English
3-3
• Adjust the camera to target the video location and tighten the bracket handle on the camera mount
bracket. Install the camera on to the male screw of the Camera Mount Bracket by rotating the camera
in clockwise.
• Loosen the handle by turning it in a counter-clockwise direction and then adjust the camera position .
Tighten the handle, turning it clockwise, and lock the camera in position.
• Connect the camera cable to the camera.
SHR-1040/SHR-1040K-ENG 2006.4.4 11:12 AM ˘ ` 2-11
To Next Page
Loading...
