Samsung SNB-6004 User Manual (English)

Other manuals for Samsung SNB-6004

Questions and Answers:

C
Christine BergAug 22, 2025
What to do if I can’t access the Samsung SNB-6004 from a web browser?
- B
  Brittany AndersonAug 22, 2025
  If you're having trouble accessing your Samsung Security Camera through a web browser, there are several things you can check: * Ensure the camera's network settings are correctly configured. * Verify that all network cables are properly connected. * If using DHCP, confirm the camera can obtain dynamic IP addresses without issues. * If connected to a Broadband Router, check that port forwarding is set up correctly.
W
wangemilyAug 23, 2025
Why is my Samsung Security Camera not detected in the IP installer program?
- J
  jamesandersonAug 23, 2025
  If your Samsung Security Camera isn't being detected by the IP installer program, try turning off the firewall settings on your PC and then search for the camera again.
L
Larry ParkAug 25, 2025
Why is there no image appearing on my Samsung SNB-6004?
- S
  Stephanie LittleAug 26, 2025
  If no image appears, and the transmission method is set to multicast, verify that the LAN the camera is connected to has a router that supports multicast.
R
Rebecca SuttonAug 27, 2025
What to do if I cannot record into the Micro SD memory card of my Samsung SNB-6004?
- M
  Michelle StoneAug 27, 2025
  If you cannot record onto the Micro SD memory card, check to see if the memory card is defective.
J
Jamie BellAug 27, 2025
What to do if the Samsung SNB-6004 Security Camera viewer got disconnected during monitoring?
- C
  Carl EdwardsAug 27, 2025
  If the viewer disconnects during monitoring, it may be due to changes in camera or network configurations. Check all network connections. Also, if the camera is connected over a PPPoE network, poor network conditions might cause disconnections.
N
Nicole DelgadoAug 29, 2025
Why do images overlap on my Samsung SNB-6004?
- R
  ricardowhiteAug 29, 2025
  If images overlap, it may be because multiple cameras are using the same address. Check that each camera is set to a different multicast address.
J
Jennifer BrewerAug 30, 2025
Why is my Samsung SNB-6004 not operating properly with the Micro SD memory card inserted?
- V
  Vanessa GibsonAug 30, 2025
  If the camera isn't working correctly with the Micro SD card inserted, ensure the card is inserted in the correct direction. Also, format the memory card again in the camera's ? ? menu, as operation isn't guaranteed if the card was formatted by other devices.
M
Michelle SandovalAug 31, 2025
Why am I not receiving notification emails from my Samsung SNB-6004 Security Camera when an analysis event occurs?
- B
  Brenda FloresSep 1, 2025
  If you are not receiving notification emails when a video analysis event occurs, verify the following settings in sequence: 1. Check the settings. 2. Ensure that is set to . 3. Confirm that the option in the menu is checked.
C
Chelsey BrownSep 2, 2025
What to do if I cannot connect to the Samsung Security Camera system using a tab browser of Internet Explorer 7.0?
- D
  David SnyderSep 2, 2025
  To connect to the system, avoid using a new window or tab. Instead, select “File ? New session.” This is because an error may occur when connecting with a new window or tab since the cookie data are shared.
S
stephanie74Sep 3, 2025
What to do if no signal is found at the Alarm Output port of my Samsung SNB-6004?
- D
  David ZimmermanSep 3, 2025
  If there is no signal at the Alarm Output port when an intelligent video analysis event occurs, check the alarm output port settings.