What to do if I have set to in , but the green box is hardly displayed or excessive on the monitoring screen of Samsung Security Camera?
If the green box is hardly displayed, adjust the sensitivity to higher in - ; if the green box is excessive, adjust the sensitivity to lower in - .
What to do if I have set to in , but the green box on the monitoring screen is displayed bigger or smaller than the image size of the passer-by on Samsung Security Camera?
Change the object size as appropriate in - on the monitoring screen and check if the green box fits.
General| Lens | Fixed |
|---|---|
| Aperture Ratio | F2.0 |
| Power Consumption | Max. 3.5W |
| Ingress Protection | IP66 |
| Power Supply | 12V DC / 24V AC |
| Video Output | 1.0 Vp-p, 75Ω composite |
| Operating Temperature | -10°C ~ +50°C (+14°F ~ +122°F) |
| Type | Dome |
| Sensor | 1/3" CCD |
| Mount Type | Ceiling |
| Focal Length | 2.8mm |
| Effective Pixels | 768(H) x 494(V) |
Key safety instructions for operation and installation to prevent hazards like electric shock and fire.
Do not open cover; refer servicing to qualified personnel to avoid electric shock.
Comprehensive safety advice for product usage, installation, and environment.
Precautions for installation location and product handling to ensure safe operation.
Details on camera capabilities and required PC system specifications for operation.
Explains communication protocols, monitoring, alarm, object counting, and ONVIF compliance.
Step-by-step guide for accessing the camera and mounting it securely.
Defining and styling privacy zones to mask specific image areas.
Steps for connecting the camera to a router via xDSL or cable modem.
Guide for connecting the camera within a local area network to a router.
Connecting the camera directly to a DHCP modem for network access.
Connecting the camera directly to a local PC within the LAN.
Step-by-step guide for manually setting static IP, subnet mask, gateway, and ports.
Specifics on IP ranges, gateway, and port assignments for static IP setup.
Using the IP Installer for automatic network settings configuration.
Understanding dynamic IP configurations and methods to check them.
Configuring port forwarding on the router for remote camera access.
Accessing the camera remotely via DDNS or router IP address.
Viewing and understanding object counting results for lines and areas.
Configuring default video resolution, quality, and codec options.
Setting static/dynamic IP, MAC, gateway, DNS, and server ports.
Setting up login authentication and registering new user accounts.
Setting or synchronizing the camera's date and time using NTP or PC.
Resetting system settings and configuring secure HTTPS connections.
Configuring FTP and SMTP servers for alarm image transfers.
Selecting how alarm images are transferred (FTP, Email, SD Card).
Setting up alarm input types, activation times, and output actions.
Enabling and configuring object counting features and defining counting rules.
Solutions for browser access, viewer disconnection, and network detection issues.
To Next Page