English _17
● OVERVIEW
Components
Item Description
a
PoE Connector Connects to the network and supplies power through Ethernet cable.
b
Alarm Input Port
Alarm IN
Used to connect the alarm input sensor or external day/
night sensor.
GND Common port for alarm output signal.
c
Test Monitor Out
Output port for test monitoring the video output. Use the test monitor cable
to connect to a mobile display and check the test video.
d
IR LED These infrared LED’s are controlled by the illumination sensor.
e
Illumination Sensor Detects incoming light to control the IR LED.
BROWN=Alarm
IN BLU=GND
a
b
c
d
e
To Next Page
Loading...
