What to do if Samsung SNP-6201 Security Camera viewer got disconnected during monitoring?
Viewers might disconnect if there are changes to the camera or network configurations. You should check all network connections. Also, if the camera is connected over a PPPoE network, poor network conditions might cause disconnections.
Why Samsung Security Camera connected to the network is not detected in the IP installer program?
The reason why the camera is not detected is most likely because of firewall settings on your PC. Turn off the firewall and search for the camera again.
Why does Samsung SNP-6201 Security Camera not record into the SD memory card?
The memory card might be defective. Alternatively, check if the write protection tab on the memory card is set to “LOCK.”
Why am I not receiving notification e-mails from my Samsung Security Camera when motion detection is enabled?
First, verify the settings. Next, ensure that is set to . Finally, check if the option in the menu is selected.
What to do if Samsung SNP-6201 Security Camera SD memory card is inserted but the camera does not operate properly?
Ensure the memory card is inserted correctly. Note that the camera might not guarantee operation with memory cards formatted by other devices. Try formatting the memory card again in the ? ? menu.
Why Samsung SNP-6201 Security Camera images overlap?
Check if multiple cameras are using the same multicast address instead of unique addresses. Overlapping images can occur if multiple cameras share a single multicast address.
What to do if no signal is found at the Alarm Output port of Samsung SNP-6201 Security Camera?
Check the alarm output port settings.
Why Samsung SNP-6201 cannot format the SD memory card?
Check if the write protection tab of the memory card is set to “LOCK.”
What to do if I cannot connect to Samsung SNP-6201 using a tab browser of Internet Explorer 7.0.?
An error may occur when connecting with a new window or tab because cookie data is shared. Instead of using a new window or tab, select “File ? New session.”
Essential guidelines for safe operation and handling of the network camera.
Highlights the key functionalities and capabilities of the network camera.
Details the items provided in the product package for setup and use.
Guidelines for physically mounting and installing the camera and its bracket.
Step-by-step guide for managing the SD memory card for storage.
Steps to establish a network connection for the camera within a local network.
Manual configuration of the camera's IP address, subnet mask, and gateway.
Configuring the router to allow remote access to the camera.
Procedures for accessing the camera's interface via a web browser.
Navigating and utilizing the real-time video display interface.
Instructions for searching and playing back recorded video footage.
Configuration options for video quality, profiles, and audio settings.
Settings for IP configuration, ports, DDNS, and IP filtering.
Configuring intelligent video analysis features like motion and object detection.
Technical details and specifications for SNP-6201 and SNP-6201H models.
Common problems and their solutions for camera operation and connectivity.
General| Resolution | 600 TV Lines |
|---|---|
| Day/Night Functionality | Yes |
| Power Supply | 12V DC |
| Operating Temperature | -10°C to +50°C |
| Video Output | 1.0 Vp-p, 75 Ohm |
| Operating Humidity | 20% to 80% |
To Next Page
