English _75
● SETUP SCREEN
Camera setup
You can change the camera settings according to the environment where the camera is
located.
1. From the Setup menu, select the
<
Video & Audio ( )> tab.
2. Click <Camera setup>.
3. Configure the settings as necessary
of : Sensor, SSDR, White balance,
Backlight, Exposure, Special, Focus,
OSD, Time OSD
4. When done, click [Apply ( )].
M
If a certain time (timeout: 240s) is elapsed
with your not pressing the [Apply (
)]
button after changing the settings, your
changes will not be applied.
To Set the Sensor
It specifies how many frames the camera CMOS sensor will capture per second.
1. Select <Sensor>.
2. Select <Sensor mode>.
M
Refer to “Video profile” for the framerate
setup range of the <Video profile>
according to mode setup. (Page
68)
SSDR (Samsung Super Dynamic Range) Setup
In a scene where the difference between bright and dark is severe, you can increase the
brightness of the dark area alone to regulate the overall brightness.
1. Select <SSDR>.
2. Set <Mode> to <On>.
3. Configure the <Level> setting as
necessary.
• Level : Adjust the level of the dynamic range.
To Next Page
Loading...
