English _35
● INSTALLATION & CONNECTION
INSERTING/REMOVING A SD MEMORY CARD
J
Disconnect the power cable from the camera before inserting the SD memory card.
Inserting a SD Memory Card
1. Open the cover in the rear of the camera.
(SNP-6201)
Using the screw driver, loosen 3 screws by turning
them counterclockwise and separate the dome cover.
(SNP-6201H)
2. Push the SD memory card in the direction of the
arrow shown in the diagram.
J
Do not insert the SD memory card while it’s upside down
by force. Otherwise, it may damage the SD memory card.
To Next Page
Loading...
