Samsung SNP-6200RH - User Manual

Questions and Answers

G
gregory61Aug 16, 2025
Why can't I access my Samsung Security Camera from a web browser?
- B
  Brian MullenAug 16, 2025
  There might be a few reasons why you can't access your camera. First, ensure the camera's network settings are correctly configured. Second, verify that all network cables are properly connected. If you're using DHCP, confirm the camera can obtain dynamic IP addresses without issues. Lastly, if the camera is connected to a Broadband Router, check that port forwarding is properly configured.
D
Dennis SalasAug 19, 2025
What to do if the Samsung SNP-6200RH Security Camera connected to the network is not detected in the IP installer program?
- D
  David HallAug 19, 2025
  If the camera is not detected, turn off the firewall settings on your PC and then search for the camera again.
S
Sarah SingletonAug 22, 2025
Why Samsung Security Camera cannot record into the SD memory card?
- D
  Deborah BentleyAug 22, 2025
  There are a couple of things to check if you can't record to the SD card: * First, verify if the memory card itself is defective. * Second, ensure that the write protection tab on the memory card is not set to “Lock.”
A
Anne RichardAug 25, 2025
What to do if Samsung Security Camera SD memory card is inserted but the camera does not operate properly?
- C
  ckiddAug 26, 2025
  If the camera doesn't operate properly with the SD card inserted: * Check if the memory card is inserted in the correct direction. * If the memory card was formatted by another device, format it again in the camera's menu under ? ? .
L
laura87Aug 28, 2025
Why Samsung Security Camera images overlap?
- C
  Christian HowardAug 28, 2025
  If images overlap, check whether two or more cameras are set to a single multicast address instead of different addresses. This can happen if a single address is used for multiple cameras.
M
Morgan WangAug 31, 2025
Why Samsung SNP-6200RH Security Camera cannot format the SD memory card?
- M
  Michael MillerAug 31, 2025
  If you cannot format the SD memory card, check if the write protection tab of the memory card is set to “Lock.”
D
David CobbSep 3, 2025
Why no image appears on Samsung Security Camera?
- J
  Joseph AdamsSep 3, 2025
  If no image appears and the transmission method is set to multicast, check whether there is a router that supports multicast in the LAN the camera is connected to.
D
Danielle ThomasSep 6, 2025
How to fix cannot connect to Samsung SNP-6200RH system using a tab browser of Internet Explorer 7.0?
- J
  Jessica Taylor MDSep 6, 2025
  If you're having trouble connecting with a new window or tab, it might be because the cookie data is shared, generating an error. Instead of using a new window or tab, select “File ? New session.”
K
Kyle GarciaSep 9, 2025
Why no file is transferred via e-mail on occurrence of intelligent video analysis event of Samsung Security Camera?
- T
  Troy RichardsonSep 9, 2025
  If no file is transferred via e-mail, verify the following settings: 1. Check settings. 2. Ensure the is set to . 3. Alarm Video Transmission must be enabled.
C
christopher56Sep 12, 2025
Why no signal is found at the Alarm Output port even when an intelligent video analysis event is generated on Samsung SNP-6200RH?
- J
  Jared WrightSep 12, 2025
  If no signal is found at the Alarm Output port, check the alarm output port settings.

Summary

OVERVIEW

Important Safety Instructions

Crucial safety guidelines to follow before operating the device.

Product Features

INSTALLATION & CONNECTION

Installation

Provides general guidelines and steps for the physical installation of the camera and brackets.

NETWORK CONNECTION AND SETUP

Connecting to Local Area Networking

Details on how to connect the camera directly to a local area network.

Connecting to DHCP Based DSL;Cable Modem

Connecting to PPPoE Modem

Connecting to Broadband Router

Static IP Setup

Procedures for manually configuring a static IP address for the camera.

Dynamic IP Setup

Information and steps for setting up the camera with a dynamic IP address.

Port Range Forward (Port Mapping) Setup

Connecting from a Remote PC via Internet

WEB VIEWER

Connecting to the Camera

Login Procedure

Using the Live Screen

Explains the various controls and features available on the live video display screen.

Playing Recorded Video

Instructions on how to search and play back recorded video footage from the camera.

SETUP SCREEN

Audio & Video Setup

Video Setup

PTZ Setup

Configuration options for controlling the camera's Pan, Tilt, and Zoom movements.

Network Setup

Configuration of network parameters such as IP address, DNS, and connectivity types.

Event Setup

Configuring how the camera responds to detected events, including FTP/Email transfers.

SD Record

Alarm Input 1 ~ 4

VA; MD

Setup for Video Analysis (VA) and Motion Detection (MD) events.

Face Detection

Tampering Detection

System Setup

General system configurations including product information, date/time, and user settings.

Upgrade; Reboot

APPENDIX

DIP Switch Setting

Troubleshooting

Common problems and their solutions for camera operation and connectivity.

Samsung SNP-6200RH Specifications

General

Total megapixels	2 MP
Maximum resolution	1920 x 1080 pixels
Supported video modes	1080p, 720p
Video formats supported	H.264, M-JPEG
Supported graphics resolutions	320 x 240, 1280 x 960, 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 640 x 480 (VGA), 800 x 600 (SVGA)
Pan range	0 - 360 °
White balance	Manual, Outdoor
Tilt angle range	-5 - 185 °
Angle of rotation	360 °
Camera shutter speed	1/25 - 1/33000 s
Minimum illumination	0 lx
Sensor type	CMOS
Progressive scan	Yes
Optical sensor size	1/3 \
Optical zoom	20 x
Focal length range	4.45 - 89 mm
Normal focusing range	1 m
Security algorithms	HTTPS
Built-in HDD	No
Compatible memory cards	SD, SDHC
LED type	IR
Type	IP security camera
Placement supported	-
Connectivity technology	Wired
Maximum operating distance	100 m
Form factor	Dome
Mounting type	Ceiling/wall
Product color	Black, White
International Protection (IP) code	IP66
Interface	RJ-45
Ethernet LAN (RJ-45) ports	1
Signal-to-Noise Ratio (SNR)	50 dB
Cabling technology	10/100Base-T(X)
Supported network protocols	TCP/IP, UDP/IP, RTP(UDP), RTP(TCP), RTCP, RTSP, NTP, HTTP, HTTPS, SSL, DHCP, PPPoE, FTP, SMTP, ICMP, IGMP, SNMPv1/v2c/v3(MIB-2), ARP, DNS, DDNS, QoS, PIM-SM, UPnP
AC input voltage	24 V
Power consumption (typical)	30 W
Operating temperature (T-T)	-50 - 55 °C