Samsung SNO-7080R - Page 50

setup screen
50_ setup screen
OSD Setup
1. Select <OSD>.
2. Select each item and set it properly.
• Camera title : Use alphanumeric
characters in the list and enter a
desired title in the bottom input line.

You can enter up to 15 characters for the title.
• Camera title position x, y : Specify the coordinates where the camera title is
displayed.
Time OSD Setup
1. Select <Time OSD>.
2. Select each item and set it properly.
• Time display : Specify the use of time
display.
• Date format : Specify the date format
that will be displayed on the screen.
• Time position display X, Y : Specify the position of time.
• Display weekday : Specify the date display on the screen.
IR Mode Setup
1. Select <IR Mode>.
2. Select each item and set it properly.
• IR Mode : When the IR indicator
turns on in B/W mode, the screen
will be protected from saturation on the center area so that you can identify a
short-distant object.
- Off : IR mode will be disabled.
- Auto : Adjust the IR brightness according to the brightness of the object on the
center screen.
- Manual : Adjust the IR brightness manually.
• Level : If you set IR mode to Manual, you can adjust the brightness level of the IR
indicator to between 0 and 32.
M

IR mode will be activated when <Day & night> is set to <Auto> or <B/W>.