40_ maintain
4. After a cleaning run, fi rst fi x the side of the power brush
opposite to the Power Switch and then fi x the other side.
5. Insert the side into the two grooves and assemble it by
slightly sliding it down until it clicks into place.
• To prevent the vacuum cleaning robot from becoming clogged, be careful not to vacuum tooth
picks or cotton swabs.
• When removing foreign substances becomes diffi cult, contact a customer care center.
• Because the power brush vacuums the dust on the fl oor, long strings or hair can become
wrapped around the brush. Check and clean the power brush regularly.
CAUTION
DJ68-00691B-EN.indd 40DJ68-00691B-EN.indd 40 13. 01. 30 오후 8:2313. 01. 30 오후 8:23
To Next Page
Loading...
