What to do if there appears a message saying there is a failure during Easy-Setup?
You may have failed temporarily due to the distance from the wireless router or other obstacles. Please try again after a while.
How to fix Samsung POWERbot Vacuum Cleaner not finding docking station?
If your Samsung POWERbot Vacuum Cleaner cannot find the docking station, check for a power failure or unplugged power cord. Also, remove any obstacles around the docking station. If there's foreign matter on the charge pins, clean them off.
What to do if my Samsung POWERbot Vacuum Cleaner is not working?
If your Samsung POWERbot Vacuum Cleaner isn't working, first check if the emergency switch is on. Ensure all icons are displayed on the display panel. Verify the POWERbot's battery isn't depleted; if 'Lo' is displayed, place it on the docking station to charge. If the battery indicator blinks, manually place it on the docking station. If the remote isn't working, replace the batteries (AAA type).
Why is point cleaning not working on my Samsung POWERbot Vacuum Cleaner?
Point cleaning on your Samsung POWERbot Vacuum Cleaner may not work if you point the red light directly at the POWERbot; instead, point the red light on the floor within 0.5 m of the POWERbot. Also, avoid using point cleaning in direct sunlight, under bright light, or on dark floors.
Why doesn't the intelligent power control function work on my Samsung POWERbot Vacuum Cleaner?
When the POWERbot cleans a carpet with short fibre and bright color, it may recognize the carpet as a floor and then the Intelligent power control function may not work.
What to do if during Samsung product registration, the wireless router I want to connect cannot be searched?
Cancel the product registration, run the Samsung Connect App again, and try the product registration again.
What to do if Samsung Connect App and the POWERbot connection cut occurs though the product registration is completed?
Refresh the screen and wait. Run the Samsung Connect App again. Check whether there is an internet connection problem. Especially, a firewall may interrupt standard operation.
What to do if during Samsung product registration, recharging button is pressed and held as instructed but the next step does not appear?
Press the recharging button until you hear it beep. If the next step does not appear within several seconds, press the recharging button one more time.
How to solve Samsung POWERbot Vacuum App I have installed the Samsung Connect app, but, the POWERbot fails to be connected?
You can use the product after connecting the wireless router and the POWERbot through Easy-Setup according to the procedure.
Why doesn't the Edge clean master function work on my Samsung POWERbot Vacuum Cleaner?
The Edge clean master may not work if the POWERbot cannot recognize the wall. It may also fail if an obstacle made of reflective material is in front of the wall, if the wall itself is made of reflective material, or if the wall is a dark color.
General| Model | SR1 M70 |
|---|---|
| Category | Vacuum Cleaner |
| Dust Collection | Bagless |
| Battery Type | Li-ion |
| Battery Voltage | 14.4 V |
| Battery Life | Up to 90 minutes |
| Filter Type | HEPA |
| Connectivity | Wi-Fi |
| App Control | Yes |
| Auto Recharge | Yes |
| Virtual Guard | Yes |
| Dustbin Capacity | 0.3 L |
| Charging Time | 180 minutes |
| Navigation | Visionary Mapping Plus |
| Voice Control | Yes |
| Features | Edge Clean Master |
To Next Page
