How to solve Samsung POWERbot Vacuum App Edge clean master function works though there is no wall or corner?
Check whether small obstacles are arranged in a narrow space. When the POWERbot recognizes the front obstacle as a wall, Edge clean master function may work.
What to do if the Samsung POWERbot Vacuum App products do not work even though the smart phone is normally connected to the POWERbot?
Turn off the Samsung Connect app and then run it again. Disconnect the smart phone from the wireless router and then connect it again. Turn off the power supply of the POWERbot, turn it on, wait for a minute or longer, and then run the Samsung Connect app again.
What to do if Samsung Connect App functions do not work?
Check if the Smart control blocking function of the POWERbot is set. (When the Smart control is locked, the Wi-Fi indicator is turned off.)
What to do if Samsung Connect App controlling does not work since the remote control function is disabled?
Remote control function is disabled status. Make the remote control function enabled status with a remote controller.
Why doesn't the intelligent power control function work on my Samsung POWERbot Vacuum Cleaner?
When the POWERbot cleans a carpet with short fibre and bright color, it may recognize the carpet as a floor and then the Intelligent power control function may not work.
Why is point cleaning not working on my Samsung POWERbot Vacuum Cleaner?
Point cleaning on your Samsung POWERbot Vacuum Cleaner may not work if you point the red light directly at the POWERbot; instead, point the red light on the floor within 0.5 m of the POWERbot. Also, avoid using point cleaning in direct sunlight, under bright light, or on dark floors.
What to do if my Samsung POWERbot Vacuum Cleaner is not working?
If your Samsung POWERbot Vacuum Cleaner isn't working, first check if the emergency switch is on. Ensure all icons are displayed on the display panel. Verify the POWERbot's battery isn't depleted; if 'Lo' is displayed, place it on the docking station to charge. If the battery indicator blinks, manually place it on the docking station. If the remote isn't working, replace the batteries (AAA type).
How to fix Samsung POWERbot Vacuum Cleaner not finding docking station?
If your Samsung POWERbot Vacuum Cleaner cannot find the docking station, check for a power failure or unplugged power cord. Also, remove any obstacles around the docking station. If there's foreign matter on the charge pins, clean them off.
General| Model | SR1 M70 |
|---|---|
| Category | Vacuum Cleaner |
| Dust Collection | Bagless |
| Battery Type | Li-ion |
| Battery Voltage | 14.4 V |
| Battery Life | Up to 90 minutes |
| Filter Type | HEPA |
| Connectivity | Wi-Fi |
| App Control | Yes |
| Auto Recharge | Yes |
| Virtual Guard | Yes |
| Dustbin Capacity | 0.3 L |
| Charging Time | 180 minutes |
| Navigation | Visionary Mapping Plus |
| Voice Control | Yes |
| Features | Edge Clean Master |
To Next Page
