What to do if my Samsung POWERbot Vacuum Cleaner is not working at all?
If your POWERbot is not working, please check the following: * Ensure that the emergency switch is on. * Verify that all icons are displayed on the display panel. * Make sure the POWERbot's battery isn't depleted. * If the remote controller isn't working, replace its batteries (AAA type).
Why is the suction power weak on my Samsung POWERbot Vacuum Cleaner?
The suction power might be weak due to several reasons: * The dustbin may be too full. If this is the case, turn off the emergency switch and empty the dustbin. * The intake on the bottom of the POWERbot could be blocked. Turn off the emergency switch and remove any foreign matter. * The dustbin might be assembled incorrectly. Turn off the emergency switch and refer to page 17 for reassembling. * Increased noise can also indicate a full dustbin, so turn off the emergency switch and empty it.
What to do if my Samsung POWERbot Vacuum Cleaner has stopped during cleaning?
If the POWERbot stops during cleaning: * If it's stuck on an obstacle like a cord, pick it up and move it away from the obstacle. * If fabric or string is caught in a drive wheel, turn off the emergency switch and remove the obstruction before using it again.
Why can't my Samsung POWERbot Vacuum Cleaner find the docking station?
If your POWERbot is having trouble finding the docking station, consider these points: * Check for a power failure or if the power plug is unplugged. * Remove any obstacles around the docking station. * Clean any foreign matter off the charge pins.
Why does my Samsung POWERbot Vacuum Cleaner suddenly clean diagonally?
The POWERbot might clean diagonally for several reasons: * Check if the docking station is installed along the grain of wooden floors or tiles. * It may be taking the shortest route to another area. * It might have bumped into an obstacle at an angle. * It could have been charged at the charger at an angle. * The grain of the wooden/tile floor may be skewed in that direction.
General| Bagged or Bagless | Bagless |
|---|---|
| Battery Type | Lithium-Ion |
| Model | R9000 Series |
| Type | Robot Vacuum |
| Filter Type | HEPA |
| Connectivity | Wi-Fi |
| Navigation Technology | Visionary Mapping Plus with FullView Sensor |
Covers general safety, warning symbols, California Proposition 65, and important instructions.
Provides essential safety instructions for operating the appliance safely.
Instructions for connecting the adapter jack, power cord, and plugging into the outlet.
Steps for turning on the switch, placing on dock, and checking charging status.
Instructions for turning the POWERbot on/off and starting Auto or Spot clean modes.
Explains functions for power, recharging, cleaning modes, suction, and direction control.
Provides a checklist of common symptoms and their corresponding solutions for the POWERbot.
To Next Page