maintain _39
04 MAINTAIN
CLEANING THE VACUUM CLEANING ROBOT
Cleaning the Power Brush
You must turn off the Power Switch at the bottom of the
main unit before cleaning the vacuum cleaning robot.
• Because the dust in the dust bin may come out, separate the
dust bin fi rst before cleaning the power brush.
1. After checking whether there are any foreign substances, press
the hook that is fi xing the brush cover to separate it.
2. Lift the power brush up from the main unit.
3. Remove any foreign substances such as long hairs or strings
wrapped around the power brush using a cleaning brush or a
vacuum cleaner.
CAUTION
DJ68-00691B-EN.indd 39DJ68-00691B-EN.indd 39 13. 01. 30 오후 8:2313. 01. 30 오후 8:23
To Next Page
Loading...
