English _19
CONNECTING WITH OTHER DEVICE
Connecting POS Device
You can connect a POS device to the RS-232C port on the product’s rear side when you connect it directly
with a RS-232C cable.
Connection setup for the RS-232C port is available in “Main Menu > Device > POS Devices”, press the
<POS Device Setup> button and set <Baudrate, Parity, Data, Stop
bit>. (Page 52 )
Connecting the Alarm Input/Output
The Alarm In/Out port at the back is composed of the following.
SRD-842
•ALARM IN 1 ~ 8 : Alarm Input Port
•ALARM OUT 1 ~ 2 : Alarm Output Port
Alarm
Sensors
jvtX
jvtY
ALARM IN
ALARM OUT
(30VDC 3A,
250AV 3A MAX)
To Next Page
Loading...
