English _73
MAIN MENU
Live Transfer
Sets the quality of the image that is transferred from the DVR to the network.
Using the mouse may help make setup easier.
1. Use the up/down buttons (▲▼) in <Network> window to
move to <Live Transfer>, and press [ENTER] button.
The Live Transfer window appears.
2. Use direction buttons (▲▼_ +) to move to a desired item,
and set the value.
•Resolution: Shows the selected network profile’s resolution
setting.
•Quality: Shows the selected network profile’s image quality
setting.
3. When the live transfer is done, press <OK>.
Live Transfer
OK Cancel
Previous/Next Page
CH Resolution
Quality
1 CIF
Low
2 CIF
Low
3 CIF
Low
4 CIF
Low
5 CIF
Low
6 CIF
Low
7 CIF
Low
8 CIF
Low
To Next Page
Loading...
