70_ web viewer
web viewer
OSD INFORMATION DISPLAY
The channel number, video size, and IP address of the
connected DVR are displayed.
b This icon will appear if the audio signal is currently being output.
c The current date and time will be displayed according to the
selected time information display setting <DVR Time> or <PC
Time>.
Alarm icon appears when alarm is issued.
It disappears when pressed the [ALARM] button of the DVR.
Motion icon appears when motion is detected.
It disappears when pressed the [ALARM] button of the DVR.
It displays whether the PTZ controls are active.
M
If you have set PTZ cameras for the DVR, “PTZ” is displayed on the
screen. Select a PTZ camera channel and use the [PTZ] button for camera control.
SPLIT-SCREEN
You can change the split mode by clicking each number icon.
• Click < > button.
The screen displays the selected camera connected to the DVR in
“SINGLE MODE”.
• Click <
> button.
The screen displays the selected camera connected to the DVR in
“QUAD MODE”.
• Click <
> button.
Switch the 1-split or 4-split mode to Full Screen mode.
Double clicking on the screen or pressing any button of the keyboard
returns to the previous mode.
SINGLE MODE QUAD MODE
To Next Page
Loading...
