Samsung SRD-443 - Mailing Service; Event Setting

English _61
 USING THE DVR
Mailing Service
You can send an e-mail to a DVR-registered user at a specific time interval, or if an event occurs.
M
 If an event occurs with a channel where the camera’s video is set to <OFF> or the remaining recording count is set
to <OFF>, only the text notification will be sent to the applicable email address.
SMTP Setting
Sets the SMTP mail server.
Using the mouse may help make setup easier.
1. In the <Network> setting window, press the up/down
( ▲▼ ) button to move to <Mailing Service> and press the
[ENTER] button.
2. Select <SMTP>.
You will see the SMTP setting window.
3. Use direction buttons (
▲▼◄ ► ) to move to a desired item
and set the value.
• ServerType : Displays the connected server type.
• Server : Enter a server to connect to.
• Port : Sets the communication port.
• Use Authentication : Check this if the SMTP server uses user authentication.
The account input box will be activated.
• User : Enter a user to use authentication when connecting to the SMTP server.
• Password : Enter the password of the SMTP server user.
• Secure Transfer : Select one from <Never> and <TLS(if Available)>.
• Sender : Use the virtual keyboard to provide the email address.
 Refer to “Using Virtual Keyboard”. (Page 30)
• TEST : Conducts the test on the server settings.
4. When the SMTP setting is done, press <OK>.
Event Setting
You can set the interval and type of the event that will be sent to the user.
Using the mouse may help make setup easier.
1. In the <Network> setting window, press the up/down
( ▲▼ ) button to move to <Mailing Service> and press the
[ENTER] button.
2. Select <Event>.
3. Use direction buttons (
▲▼◄ ► ) to move to a desired item
and set the value.
• Event Interval : Set the event interval.
 If a series of events occurs, the e-mail will be sent at the specified
interval, not on each event.
• Use Event Transfer : Select an event type to send if an event occurs.
If the selected event occurs, the e-mail will be sent to the group that has the recipient authority.
4. When the event setting is done, press <OK>.
Mailing Service
SMTP
Event
O K C a n c e l
U s e A u t h e n t i c a t i o n
Group Recipient

S e r v e r T y p e S M T P m a i l S e r v e r

S e r v e r

P o r t 25

U s e r

P a s s w o r d

S e c u r e T r a n s f e r N e v e r

S e n d e r e x . u s e r @ e x a m p l e . n e t
T E S T
Use Event Transfer : Select an event type to send if an event occurs.
Mailing Service
SMTP
O K C a n c e l
Recipient

E v e n t I n t e r v a l 10 m i n

U s e E v e n t T r a n s f e r
S e n s o r M o t i o n
C h a n g e P / W H D D I n f o V i d e o L o s s
P o w e r O n / O f f M a n u a l R e c o r d
Event
Group