74_ web viewer
web viewer
CONNECTED DVR
This displays the IP address and the status of the connecting DVR.
M
Connection failure message
No Response : Appears when the DVR does not respond.
Access Denied : Appears when the maximum number of users is exceeded.
The number of simultaneous connections are limited to 4.
Setting the display of the OSD time information
Select <DVR Time> or <PC Time> for the OSD time information display
setting.
• DVR Time : Based on the time of the connected DVR
• PC Time : Based on the time of the PC currently running the Web Viewer.
• Audio : Sound On/Off
CHANGING THE LIVE SCREEN MODE
In the 4-split screen mode, “SEQUENCE”, “PREVIOUS” and “NEXT” buttons will be
deactivated.
• SEQUENCE : When this button is clicked, screens are switched at a
preset interval.
In SINGLE MODE, the channel numbers are sequentially switched from
1 to 4.
Preset interval (10 seconds)
• PREVIOUS : When this button is clicked, the previous screen appears.
• NEXT : When this button is clicked, the next screen appears.
In SINGLE MODE, the channel numbers are sequentially switched from
1 to 4.
To Next Page
Loading...
