English _11
Connecting to Internet through ADSL
Hub/Switcher
Phone(ADSL) Line
ADSL MODEM
RJ-45 Ethernet Cable
(Direct Cable)
Windows
Network Viewer
INTERNET
When no router is used
Static IP mode
- Internet connection : Static IP ADSL, leased line, and LAN
environments allows connection between the DVR and
remote user.
- DV
R Network Settings : Set the <Connection Mode> in
<Connection> menu of the connected DVR to <Sta
tic IP>.
Consult your network manager for IP, Gateway and Subnet Mask.
Dynamic IP (DHCP) mode
- Internet connection : Connect the DVR directly to a cable modem, DHCP ADSL modem or FTTH network.
- DVR Network Settings : Set the <Connection Mode> in <Connection> menu of the connected DVR to
<Dynamic IP>
.
ADSL (PPPoE: ID and password certification)
- Internet connection : An ADSL modem is directly connected
to the DVR, where the ADSL connection requires user ID
and password.
- DV
R Network Settings : Set the <Connection Mode> in
<Connection> menu of the connected DVR to <ADSL>
.
ADSL <User ID> and <Password> should be the same to the
ADSL user information.
If you don’t know the ID and password, consult your ADSL service
provider.
•
•
•
Connection Mode
Connection
Protocol
Connection Mode Static IP
B
andwidth 2Mbps
OK C
ancel
I
P 192.168. 1.200
G
ateway 192.168. 1. 1
S
ubnet Mask 255.255.255. 0
D
NS Manual 168.126. 63. 1
Connection Mode
Connection
Protocol
Connection Mode ADSL
B
andwidth 600kbps
OK C
ancel
I
P 192.168. 1.200
G
ateway 192.168. 1. 1
S
ubnet Mask 255.255.255. 0
D
NS Manual 168.126. 63. 1
U
ser ID ID
P
assword
********