80_ web viewer
web viewer
SPLIT-SCREEN
You can change the split mode by clicking each number icon.
• Click <
> button.
The screen displays the selected camera connected to the DVR in
“SINGLE MODE”.
• Click <
> button.
The screen displays the selected camera connected to the DVR in
“QUAD MODE”.
CONNECTED DVR
The IP of the connected DVR will be displayed. And you can also select to
turn on/off the sound and change the OSD information format to your
preference.
M
Connection failure message
No Response : Appears when the DVR does not respond.
Access Denied : Appears when the maximum number of users is exceeded.
The number of simultaneous connection is limited to 3.
SINGLE MODE QUAD MODE
To Next Page
Loading...
