Samsung SRF890SWLS - Re-Attaching the Refrigerator Doors; Disassembling the Flex Door

English - 19
SETTING UP
RE-ATTACHING THE
REFRIGERATOR DOORS
Toreattachthefridgedoorsafteryouhavemoved
thefridgetoitsnallocation,assembletheparts
inreverseorder.
1. TheWaterLinemustbefullyinsertedintothe
centerofthetransparentcoupler(TypeA)
ortheGuideLines(TypeB)topreventwater
leakagefromthedispenser.
Center of Transparent
coupler
The Guide Lines
Dispenser
Type A Type B
DISASSEMBLING THE FLEX
DOOR
1. TakeouttheFlexZone(1)byliftingitup.
1
2. Takeoffthecover(2)w/harnesswithaat-
bladescrewdriver(-).
2
3. PressthelockingtabandseparatetheWire
Connector.
Whenreassemblingit,besuretoconnect
thewireharness.
Ifitisnotconnected,theFlexRoomdoes
notwork.
4. Remove1hexheadboltfromeachsidewitha
socketwrench(10mm).
5. LiftuptheFlexdoorfromtherails.
Puttingtoomuchfoodintothefreezer
drawerscanpreventthefreezerfrom
closingcompletelyandcancausefrost
build-up.
CAUTION
CAUTION
DA68-02915A-11.indd 19 2015. 5. 8. �� 8:52