SVR-1630
오류
!
스타일이
정의되어
있지
않습니다
.
18
2004.07.2001 (v 1.0)
Samsung Techwin CO.,Ltd.
3.9 Relay Control
- This menu turns the Relay on or off. (The SVR-1630 supports 4 Relay outputs.)
- Press the [RELAY] button.
- The “Relay On” Icon is displayed on the screen.
- Press the relevant Relay number (from 1 to 4), and the Relay Output signal is transmitted.
- Press the [RELAY] button twice to release Relay. The “Relay Off” Icon is then displayed.
- Press the Relay Number to release, and the relevant Relay is off.
3.10 Screen Lock
- This menu is for preventing unauthorized users from controlling the menu when an administrator or
authorized user is not on site.
- This function requires the setting of a “User Password” prior to use.
- Press the [Esc] button, and the “Screen Locked” message is shown at the bottom. Lock Mode is activated.
- In Lock Mode, none of the buttons work. The buttons are reactivated when Lock Mode is released.
- Whenever you press any button in Lock Mode, the “User Password” window is displayed. Enter the
relevant password, and Lock Mode is released.
To Next Page
Loading...
