오류
!
스타일이
정의되어
있지
않습니다
.
SVR-1630
Samsung Techwin CO.,Ltd.
2004.07.2001 (v 1.0)
39
5.4 Event Record Setup
This menu is to set the event recording conditions. It is necessary to set the “Event Record” menu to
“Yes” in “Schedule Record” to enable the SVR-1630 to record events, after the recording conditions
are set.
In addition, it is necessary to set “Event Source” before the Event Recording Setup.
5.4.1 Sensor Setup
This menu is to set the presence and types of input sensor.
The sensors support two types: Normal Open (N.O.) and Normal Close (N.C.).
Configuration Status
This indicates the status of recording conditions. If you set the recording conditions only to All Ch,
“Macro Setup” is displayed. If you change any one of the individual sensor settings, “Customer Setup” is
dislayed.
All ch
Sets all sensors to the same conditions. Select from Off/N.O./N.C. and press the “Apply” button.
Configuration
You can invididually set 16 sensors (S1~S16).
To Next Page
Loading...
