Samsung SVR-1630 - Text Input Setup; Text Setup Configuration

오류
!
스타일이 정의되어 있지 않습니다
.
SVR-1630
Samsung Techwin CO.,Ltd.
2004.07.2001 (v 1.0)
41
<MD Area Setup >
You can directly set the MD Area on the screen.
Press the “Customer Area” button, and a setup window divided into 64 cells (8 by 8) is displayed.
The areas set to MD are greyed out. Select the desired MD Areas using the arrow buttons and press the
“ENTER” button. After setting, press the “ESC” button, and you go to the previous menu.
5.4.3 Text Setup
This menu is to set the input text information. It is necessary to set COM1 in “System
Æ
Serial
Setup” in the OSD menu.