Install Manual
31
Relay out connection
Connect relays to R1 ~ R16 as illustrated in the figure below. The example shows how to
connect a warning light. Refer to the section on handling wiring for more information about
connecting or disconnecting relay wires.
Relay Out Settings
Relays can be operated with sensor or motion detection and even operate independently in
schedules. Relays can also be controlled remotely over the network with the Samsung Network
Manager software.
For more information, refer to the user manual.
The user manual can be downloaded from www.samsungcctv.com
or on the CD
provided with the product.
3.3.3.3 D-I/O (Digital Input/Output) connection & settings
The D-I/O has 12 D-I/O ports and can accommodate 12 inputs/outputs. If sensors are working
To Next Page
Loading...
