53
English
Advanced Features
■ Timer Recording (in Schedule Manager)
O
SMART HUB → Schedule Manager → ENTER
E
Allows you to make a reservation to record a program scheduled for broadcast. Set the current time first to use this function.
Using the Timer Recording function (digital channels only)
1. Press the ENTER
E
button to select Schedule Manager. The Schedule Manager screen will be displayed.
2. Press the ENTER
E
button to add manual booking. A pop up screen will appear.
3. Press the
l
or
r
button to select the Timer Recording.
✎
We recommend using a USB HDD with at least 5 400 rpm, but a USB HDD of RAID type is not supported.
✎
A USB storage device cannot record until it completes the Device Performance Test.
4. Press the
l
/
r
/
u
/
d
buttons to set the Antenna, Channel, Repeat, Start Time or End Time.
To record a current broadcasting program
Allows you to record a program currently being broadcasted.
Set the current time first to use this function.
1. When you watch a broadcast program, press the
(REC) button on the remote to record. A pop up window will appear.
✎
We recommend using a USB HDD with at least 5 400 rpm, but a USB HDD of RAID type is not supported.
✎
A USB storage device cannot record until it completes the Device Performance Test.
2. Select Length to set up the recording time, and then select OK.
Using the Timeshift function
If you missed a live broadcast, you can see from the recorded broadcast using this feature.
1. When you watch a broadcast program, press the
(Play) button on the remote to start the Timeshift function.
2. If you want to stop the Timeshift function, press the
(Stop) button on the remote.
✎
NOTE
x
The Timeshift mode operates for a maximum of 90 minutes.
x
After the Timeshift mode function has run for the maximum time, the time information will be fixed to “00:00:00.”
x
The Timeshift function is not supported for analog channels.
x
The Timeshift functions are disabled for channels locked with Channel Lock.
Connect a USB device before using the Timeshift and Recorded TV functions.
[ Recorded videos are DRM (digital rights management) protected and cannot be played on a PC or other TVs. Note that
files saved on the TV cannot be used after the main board is changed.
Connecting a USB device
Do not use a USB memory stick. We do not support a USB
memory stick.
We recommend using a USB HDD with at least 5 400 rpm,
but a USB HDD of RAID type is not supported.
To Next Page
Loading...
