21
Preparations
1
1 Preparations
Icons Description
z Open or close the onscreen display (OSD) menu, or return to the
parent menu.
z OSD control lock: Maintain the current settings, or lock the OSD
control to prevent unintended changes to settings.
Enable: To lock the OSD control, press the [ ] button for 10
seconds.
Disable: To unlock the locked OSD control, press the [ ] button
for more than 10 seconds.
If the OSD control is locked,
z Brightness and Contrast, Bright can be adjusted, and
INFORMATION can be viewed.
z The Customized Key function can be used by pressing the
[ ](S24B750H / S27B750H) button. (The Customized Key
function specified before the OSD control was locked is available
even when the OSD control is locked.)
MHL
(S24B750V / S27B750V)
Pressing the [MHL] (S24B750V / S27B750V) button when your
smartphone is connected to [HDMI IN 2 / MHL] on the product enables
the MHL function, which allows you to import data from the smartphone
to the product.
For further details on the MHL function, refer to " Using "MHL(Mobile
High-Definition Link)"".
(S24B750H / S27B750H)
When the Key guide is displayed, the [ ] button activates the function
assigned to Customized Key.
Configure Customized Key and press [ ]. The following options will
be enabled.
Angle
- Bright - Eco Saving - Image Size
To configure Customized Key, go to SETUP&RESET
Customized Key
and select the mode you want.
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
(S24B750V / S27B750V)
When the Key guide is displayed, the [ ] button activates the function
assigned to Volume
.
(S24B750H / S27B750H)
When the Key guide is displayed, the [ ] button activates the function
assigned to Brightness
.
To Next Page
Loading...
