Samsung U28E570D

29
Configuring Picture Size
In
PC mode
• Auto: Display the picture according to the aspect ratio of the each screen input source.
•
Wide: Display the picture in full screen regardless of the aspect ratio of the each screen input
source.
In AV mode
• 4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and
standard broadcasts.
•
16:9: Display the picture of the sub-screen with an aspect ratio of 16:9.
•
Screen Fit: Display the picture of the sub-screen with the original aspect ratio without cutting
anything off.
―
The function may not be supported depending on the ports provided with the product.
―
Changing the screen size is available when the following conditions are satisfied.
‒ A digital output device is connected using the HDMI/DP cable.
‒ The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every
model can support all of these signals.).
‒ This can only be set when the external input is connected through HDMI/DP and
PC/AV Mode is
set to
AV.
PBP Mode (available in PBP mode(Size ))
In PC mode
• Auto: Display the picture according to the aspect ratio of the each screen input source.
•
Wide: Display the picture in full screen regardless of the aspect ratio of the each screen input
source.
In AV mode
• 4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and
standard broadcasts.
•
16:9: Display the picture of the sub-screen with an aspect ratio of 16:9.
•
Screen Fit: Display the picture of the sub-screen with the original aspect ratio without cutting
anything off.
―
The function may not be supported depending on the ports provided with the product.
―
Changing the screen size is available when the following conditions are satisfied.
‒ A digital output device is connected using the HDMI/DP cable.
‒ The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every
model can support all of these signals.).
‒ This can only be set when the external input is connected through HDMI/DP and
PC/AV Mode is
set to
AV.
Configuring Contrast
PIP Mode
Adjust the contrast level for sub-screen. (available in PIP mode(Size / / ))
PBP Mode
Adjust the contrast level for each screen. (available in PBP mode(Size ))
PIP Mode (available in PIP mode (Size / / ))