58
Transparency
PIP
PIP
Move Enter Return
PIP ：On
Source ：HDMI 1
Size ：----
Position ：----
Transparency ：투명하게
Opaque
Medium
Low
High
-
The displayed image may differ depending on the model.
Adjusts the Transparency of PIP windows.
•
High
•
Medium
•
Low
•
Opaque
Edit Name
Edit Name
Edit Name
Move Enter Return
PC ：---- ▶
DVI ：---- ▶
AV ：---- ▶
Component ：---- ▶
HDMI1 ：PC ▶
HDMI2 ：PC ▶
-
The displayed image may differ depending on the model.
-
HDMI1 and HDMI2 are set to PC by default. To connect these ports to a device other than a
computer, change this to the appropriate setting.
Name the input device connected to the input jacks to make your input source selection easier.
VCR / DVD / Cable STB / HD STB / Satellite STB / AV Receiver / DVD Receiver / Game / Camcorder / DVD Combo / DHR /
PC / DVI PC / DVI Devices
―
The displayed devices differ depending on the external input mode.
When connecting a PC to the HDMI terminal, set Edit Name to PC. In other cases, set Edit Name to AV. However, since
640x480, 720p (1280x720), and 1080p (1920x1080) are common signals for AV and PC, make sure to set the Edit Name in
accordance with the input signal.
―
The Picture menu changes depending on the input signal and Edit Name.
When using a DVI to HDMI cable connection (which does not support audio and video at the same time), the audio port
should be connected via a separate audio cable.
When a PC is connected, set Edit Name to DVI PC to enjoy the video and audio from the connected PC.
When an AV device is connected, set Edit Name to DVI Devices to enjoy the video and audio from the connected AV
device.
To Next Page
Loading...
