95
Standby Control
Move Enter Return
Temperature
Auto Power : Off
Button Lock : Off
User Auto Color
Standby Control : 자동설정
Lamp Schedule
OSD Display
Software Upgrade
Advanced Settings
Advanced Settings
Off
On
Auto
-
The displayed image may differ depending on the model.
Sets the standby mode, which will be activated when no input signal is detected.
•
Off
A message will read No Signal if no input signal is detected.
•
On
Power-saving mode will be activated if no input signal is detected.
•
Auto
When no input signal is detected,
―
Power-saving mode will be activated if an external device is connected.
―
A message will read No Signal if no external device is connected.
―
Enabled only in PC, DVI or HDMI mode.
Lamp Schedule
Move Enter Return
Lamp Schedule : On ▶
Lamp Schedule
Lamp Schedule
Schedule 1
Hour
Lampam/pm
Minute
12 00 am
100
12 00 am
100
Schedule 2
-
The displayed image may differ depending on the model.
Adjusts the luminance to a user-specified value at a specified time.
To Next Page
Loading...
