Support Software Update ENTER
The Software Update menu lets you upgrade your product software to the latest version.
―
Be careful not to turn off the power until the upgrade is complete. The product will turn off and on automatically after completing the software upgrade.
―
When you upgrade software, all video and audio settings you have made will return to their default settings. We advise you to write down your settings so that you can
easily reset them after the upgrade.
By USB
To perform a software update from a USB device, contact the customer service centre.
Alternative Software
The Alternative Software option lets you upgrade using a file the product downloaded earlier.
1
If upgrade software has been downloaded, you will see the software version number to the right of Alternative Software.
2
Select Alternative Software, and then press the button.
3
The product displays a message asking if you want to upgrade. Select IP Address. The product begins the upgrade.
4
When the upgrade is complete, the product turns off automatically, and then turns on.
-
Current Version: This is the software
version already installed in the product.
To Next Page
Loading...
