209
MagicInfo Videowall S
MENUm → Support → Contents Home → MagicInfo Videowall S →
ENTERE → RETURN
―
To launch MagicInfo Videowall S, select MagicInfo Videowall S for the Play
Mode on the System.
―
Press the MagicInfo Lite/S button on the remote control.
Settings
Settings
Default Storage
Default content
Content Layout
Port
Safely Remove USB Device
Reset
Return
Close
Internal Memory
None
Landscape
51001
-
The displayed image may differ depending on the model.
Default Storage
Specify the location you want to save content (downloaded from the server) to.
•
Internal Memory: Save the content to the internal memory of the product.
•
External: Save the content to USB memory.
Default content
Configure the settings for the content that will play by default.
Content Layout
Switch the orientation of playing content to Landscape or Portrait mode.
•
Landscape / Portrait
―
If Content Layout is Portrait view, it does not support VP8 video codec.
Port
View the port number of the server. Use 51001 as the port number.
•
If unable to connect to the server using port number 51001, check with your server administrator to find the correct port
number and then change the port number.
Safely Remove USB Device
Safely removes USB memory
Reset
Restore all the values under Settings to the default when the product was purchased.
To Next Page
Loading...
