202
Settings
Settings
Server Network Settings
Default content duration
Content Ratio
Copy Deployed Folders
Image Eect
Default content
Content Layout
Schedule Name
Return
Close
Manual
Random
None
Landscape
YYYYMMDD
-
The displayed image may differ depending on the model.
Server Network Settings
To run MagicInfo Premium S, connect to a network.
Server
Enter the MagicInfo Premium S server settings.
•
If the SSL option is enabled, the server is configured to use https and data transfer is encrypted.
―
Enter the server IP address and port number. Use 7001 as the port number. (If unable to connect to
the server using port number 7001, check with your server administrator to find the correct port
number and then change the port number.)
FTP Mode
Specify the FTP operating mode.
•
Active / Passive
Default Storage
Specify the location you want to save content (downloaded from the server) to.
•
Internal Memory: Save the content to the internal memory of the product.
•
USB: Save the content to USB memory.
―
If a Network schedule is running when USB memory is not connected, the default content will run.
To Next Page
Loading...
