216
Other issue
Small particles are found on the edges of the product.
The particles are part of the product design. The product is not defective.
The PIP menu is not available.
The menu is enabled or disabled depending on the Source mode.
―
Refer to P.118 for details about the PIP menu.
Wenn ich die PC-Auösung ändere, wird die Meldung "The
dened resolution is not supported." appears.
Die Meldung „
The dened resolution is not supported.“ wird angezeigt, wenn die Auflösung des
externen Geräts die maximale Auflösung des Monitors übersteigt.
Ändern Sie die PC-Auflösung auf eine vom Monitor unterstützte Auflösung.
There is no sound from the speakers in HDMI mode when a
DVI-HDMI cable is connected.
DVI cables do not transmit sound data.
Make sure to connect the audio cable to the correct input jack to enable audio.
HDMI Black Level is not functioning properly on an HDMI
device with YCbCr output.
This function is available only when a source device, such as a DVD player and STB, is connected to the
product via an HDMI (RGB signal) cable.
There is no sound in HDMI mode.
Displayed picture colours may not look normal. Video or sound may not be available. This can occur if
a source device that only supports an older version of the HDMI standard is connected to the product.
If these issues occur, connect an audio cable along with the HDMI cable.
Some PC graphics cards may not automatically recognize HDMI signals that do not include sound. In
this case, manually select a sound input.
Sound input Screen mode
PC Auto PC settings
DVI PC Audio In(Streo
ports) PC settings
To Next Page
Loading...
