22
Adjusting the OSD with the Remote Control
Buttons Description
1
Open the OSD menu.
2
Select from Picture, Network, System or Support in
the displayed OSD menu screen.
3
Change settings as desired.
4
Finish setting.
5
Close the onscreen display (OSD) menu.
Remote Control Reception Range
30˚
30˚
7m-10m
Use the remote control within 7m to 10m from the sensor on the product at an angle of 30 from the
left and right.
―
Store used batteries out of reach of children and recycle.
―
Do not use a new and used battery together. Replace both batteries at the same time.
―
Remove batteries when the remote control is not to be used for an extended period of time.
To Next Page
Loading...
