How to fix a Samsung UE32J5000 LED TV that won't turn on?
If your Samsung LED TV doesn't turn on, ensure the AC power cord is securely plugged into both the wall outlet and the TV. Verify that the wall outlet is working. Try pressing the 'P' (program/channel) button on the TV itself to rule out a remote control issue. If the TV turns on with the button, the problem might be with the remote control.
Why does my Samsung UE32J5000 turn off by itself?
If your Samsung LED TV turns off automatically, ensure the Sleep Timer is set to Off in the Time menu. If a PC is connected, check its power settings. Ensure the AC power cord is securely plugged into the wall outlet and the TV. Note that the No Signal Power Off feature turns off the TV if no signal is received for a specified time, and Auto Power Off turns off the TV after four hours of no user input.
How to troubleshoot picture quality on Samsung UE32J5000?
To troubleshoot picture quality on your Samsung LED TV, first perform the Picture Test by navigating to MENU - Support - Self Diagnosis - Picture Test. If the test image displays correctly, the issue likely stems from the source or signal.
Why is there no sound on my Samsung UE32J5000 LED TV but the picture is fine?
If your Samsung LED TV has a good picture but no sound, first set the Speaker Select option to TV Speaker in the sound menu. If using an external device, ensure the audio cables are correctly connected to the TV's audio input jacks. Check the external device’s audio output settings, and if using a DVI to HDMI cable, remember that a separate audio cable is required. Try rebooting the connected device by disconnecting and reconnecting its power cable.
Why doesn't my Samsung UE32J5000 LED TV picture look as good as in the store?
If your Samsung LED TV's image quality isn't as good as it appeared in the store, consider upgrading to a digital set-top box if you're using an analogue one. Use HDMI cables for HD picture quality. Cable/Satellite subscribers should try HD stations. Aerial connections should try HD stations after performing Auto tuning. Note that many HD channels are upscaled from SD content. Adjust the Cable/Set top box video output resolution to 1080i or 720p. Ensure you're watching from the minimum recommended distance based on the screen size and signal definition.
How to remove the dotted line on the edge of my Samsung UE32J5000 LED TV screen?
If there's a dotted line on the edge of your Samsung LED TV screen, and the picture size is set to Screen Fit, change it to 16:9. Also, try changing the cable/satellite box resolution.
How to fix Samsung UE32J5000 LED TV not receiving all channels?
If your Samsung LED TV isn't receiving all channels, ensure the aerial cable is securely connected. Try running the Setup (Initial setup) to add available channels to the channel list by going to MENU - System - Setup (Initial setup) and wait for all available channels to be stored. Also, make sure the aerial is correctly positioned.
What to do if Samsung LED TV picture freezes when changing channels?
If your Samsung LED TV's picture freezes, distorts, or delays when changing channels, try resetting the cable box if you're connected through one. Disconnect and reconnect the AC cord, waiting for the cable box to reboot, which may take up to 20 minutes. Also, set the output resolution of the cable box to 1080i or 720p.
How to improve poor color or brightness on Samsung UE32J5000?
If your Samsung LED TV has poor color or brightness, adjust the Picture options in the TV menu, specifically Picture Mode, Colour, Brightness, and Sharpness. Also, adjust the Energy Saving option in the TV menu by navigating to MENU - System - Eco Solution - Energy Saving. You can also try resetting the picture settings by going to MENU - Picture - Reset Picture.
Why is the picture distorted on my Samsung UE32J5000?
Distortion in your Samsung LED TV's picture, such as macroblock errors, small blocks, dots, or pixelization, can be caused by the compression of video content, especially in fast-moving scenes. Low signal level or bad signal quality can also cause this issue, which is not a TV problem. Additionally, using mobile phones close to the TV (within approximately 1 meter) may cause noise in the picture on both analogue and digital TV.
General| Screen shape | Flat |
|---|---|
| Response time | - ms |
| Display diagonal | 32 \ |
| Display brightness | - cd/m² |
| Native aspect ratio | 16:9 |
| LED backlighting type | - |
| Supported video modes | 1080p |
| Display diagonal (metric) | 80 cm |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| Motion interpolation technology | PQI (Picture Quality Index) 200 |
| Dynamic contrast ratio marketing name | Mega Contrast |
| 3D | No |
| Annual energy consumption | 40 kWh |
| Tuner type | Analog & digital |
| Digital signal format system | DVB-C, DVB-T |
| Audio decoders | Dolby Digital, DTS Premium Sound 5.1, DTS Studio Sound |
| RMS rated power | 10 W |
| Number of speakers | 2 |
| USB 2.0 ports quantity | 1 |
| Ethernet LAN (RJ-45) ports | 0 |
| Common interface Plus (CI+) version | 1.3 |
| Number of OSD languages | 27 |
| Audio formats supported | AIFF, ALAC, FLAC, OGG, WAV, WMA |
| Video formats supported | DIVX, H.264, M-JPEG, MPEG1, MPEG2, MPEG4-SP, RV, VC-1, VP8 |
| Picture processing technology | Samsung Wide Color Enhancer Plus |
| Product color | Black |
| Panel mounting interface | 200 x 200 mm |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 28 W |
| Package depth | 127 mm |
| Package width | 882 mm |
| Package height | 497 mm |
| Package weight | 5600 g |
| Remote control type | Traditional remote control |
Weight and Dimensions| Depth (with stand) | 150.5 mm |
|---|---|
| Width (with stand) | 741 mm |
| Height (with stand) | 460 mm |
| Weight (with stand) | 4000 g |
| Depth (without stand) | 69 mm |
| Height (without stand) | 436 mm |
| Weight (without stand) | 3900 g |
To Next Page
