Samsung UE32J5000 - Checking Current Programme Info; Changing the Broadcast Signal; Checking Digital Channel Signal Info and Strength

60 61
Checking current programme info
To get information about a show that you are watching, press the Enter or INFO button.
To view information about, start instant recording for, or apply the Timeshift function on a current
programme, select it in the Programme Info window.
To view information about upcoming programmes, use the
and buttons. To set up a Schedule
Viewing or Schedule Recording for a programme, select that programme.
"
To view the programme info, you must first set the TV's clock ((MENU/123) MENU System Time
Clock).
"
The programme information may differ with the type of incoming signal and may not be available at all for
certain programmes.
"
For more information on Schedule Recording, refer to "Recording Programmes." This function is only
available on certain models in specific geographical areas.
"
For more information on Schedule Viewing, refer to "Setting Up a Schedule Viewing."
Changing the broadcast signal
(MENU/123) MENU Broadcasting Aerial
Try Now
You can choose your preferred method of receiving digital broadcasts.
"
This function is not needed if your TV is connected to a cable or satellite box.
Checking digital channel signal info and strength
(MENU/123) MENU Support Self Diagnosis Signal Information
Try Now
You can check the digital channel's signal information and strength.
"
If your TV is attached to a separate, over-the-air antenna, you can use the signal strength information to
adjust the antenna for increased signal strength and improved HD channel reception.
"
This function is only available for digital channels.