88
Adjusting picture options
(MENU/123) MENU Picture Picture Options
Try Now
You can adjust the picture options to optimise your viewing experience. Select a picture mode and
then adjust the picture options.
●
Colour Tone
Try Now
Adjusts the colour tone. The colour tone you select is stored in the TV's memory. When you
change the current picture mode, the stored colour tone is applied to the new picture mode
automatically.
"
Cool and Standard are only available when Picture Mode is set to Dynamic.
"
Colour Tone is only available when the TV is connected to a computer via an HDMI-to-DVI cable.
●
Digital Clean View
Try Now
Reduces static and ghosting caused by a weak signal. When you select Auto Visualisation, it
displays the signal strength on the bottom of the screen. Green indicates the best possible
signal.
"
This function is available for analogue channels only.
●
MPEG Noise Filter
Try Now
Reduces MPEG noise and improves video quality.
●
HDMI Black Level
Try Now
Compensates for effects caused by a low black level, such as low contrasts and dull colours.
"
This function is only available when the input signal, connected to the TV via an HDMI connector, is set
to RGB444.
●
Film Mode
Try Now
Optimises the picture quality for movies.
"
This function is only available when the input signal is TV, AV, Component (480i, 1080i), or HDMI
(1080i).
●
LED Clear Motion
Removes drag from fast scenes with a lot of movement to provide a clear picture.
"
When LED Clear Motion is On, the screen appears darker than when it is Off.
"
If LED Clear Motion is On at 60Hz video signal, the screen may flicker.
●
Analogue Clean View
Reduces noise in the form of a diagonal line that occurs due to interferences between signals.
"
This function is only supported for analogue broadcasts.
To Next Page
Loading...
