Samsung UE32J5000 - Using the CI or CI+ Card

116 117
Connecting the “CI or CI+ Card”
Connect the “CI or CI+ Card” to the COMMON INTERFACE slot as shown in the image below.
Using the “CI or CI+ Card”
To watch paid channels, the “CI or CI+ CARD” must be inserted.
●
Samsung TV follow up CI+ 1.3 standard. When TV product display the "Scrambled Signal", it
may happen due to CI+ 1.3 Version inconsistency. If you have a problem, please contact Samsung
Call Centre.
●
If you don’t insert the “CI or CI+ CARD”, some channels will display the “Scrambled Signal”
message.
●
The pairing information containing a telephone number, the “CI or CI+ CARD” ID, the Host ID,
and other information will be displayed in about 2~3 minutes. If an error message is displayed,
please contact your service provider.
●
When the configuration of channel information has finished, the message “Updating Completed”
is displayed, indicating the channel list is updated.
"
You must obtain a “CI or CI+ CARD” from a local cable service provider.
"
When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+
CARD” may cause damage to it.
"
Insert the “CI or CI+ CARD” in the direction marked on the card.
"
The location of the COMMON INTERFACE slot may be different depending on the model.
"
“CI or CI+ CARD” is not supported in some countries and regions; check with your authorised dealer.
"
If you have any problems, please contact a service provider.
"
Insert the “CI or CI+ CARD” that supports the current aerial settings. The screen will be distorted or will not
be seen.