104
Using Anynet+ (HDMI-CEC)
You can use the TV's remote control to control external devices that are connected to the TV by an
HDMI cable and that support Anynet+ (HDMI-CEC). Note that Anynet+ (HDMI-CEC) can only be set by
using the remote control.
Setting up Anynet+ (HDMI-CEC)
(MENU/123) MENU System Anynet+ (HDMI-CEC)
Try Now
●
Anynet+ (HDMI-CEC)
Try Now
You can enable or disable Anynet+ (HDMI-CEC). Set to Off or On to disable or enable all Anynet+
related functions.
●
Auto Turn Off
Try Now
When set to Yes, turns off Anynet+ compatible external devices when the TV is turned off.
"
This function is not supported by some Anynet+ compatible devices.
●
Search for Devices
Try Now
Automatically searches for and identifies Anynet+ (HDMI-CEC) compatible external devices that
are connected to the TV.
Using Anynet+ (HDMI-CEC)
Selecting an external device
After connecting external devices to the TV, select (MENU/123) MENU System Anynet+ (HDMI-
CEC) Search for Devices. The TV displays a list of Anynet+ (HDMI-CEC)-compliant devices that you
can set up as Anynet+ (HDMI-CEC)-enabled devices (i.e., devices that can be controlled with the TV's
remote control). To set up an Anynet+ (HDMI-CEC)-compliant device as an Anynet+ (HDMI-CEC)-
enabled device, you must select it on the Source screen. Follow the instructions in the next section.
"
If an external device is set up as both an Anynet+-enabled device (i.e., a device that can be controlled with
the TV's remote control) and a Universal Remote-enabled device (i.e., a device that can be controlled with
the Universal Remote), it can be only controlled with the Universal Remote.
To Next Page
Loading...
