22 23
Changing the input signal with external devices
Press the SOURCE button to switch between external devices connected to the TV.
●
Options
To view the Options menu, press the
button. The functions that appear in the Options menu
can include any of the following:
"
The connector names may vary depending on the product.
–
Edit Device Type: Changes the types of the external devices. Select an external device to
change. For example, you can use an HDMI cable to designate a computer connected to the
TV as PC. You can also use a HDMI-to-DVI cable to designate an AV devices as DVI Devices.
–
Edit Name: You can rename devices connected to the TV to facilitate identifying external
sources.
–
Information: Displays information about the connected devices.
–
Anynet+ (HDMI-CEC): Displays a list of Anynet+ (HDMI-CEC)-compliant devices that are
connected to the TV.
"
This option is only available when Anynet+ (HDMI-CEC) is set to On.
–
Remove USB Device: Removes a USB device connected to the TV.
–
Delete Universal Remote: Deletes the external device connected to the TV via the Universal
Remote function.
"
This function is only supported for J6300, J6330, J6390 models within CIS region.
–
Universal remote setup: You can use your TV remote control to control external devices.
"
This function is only supported for J6300, J6330, J6390 models within CIS region.
"
For more information on using the Universal Remote function, refer to "Controlling External
Devices with the TV Remote - Using the Universal Remote."
To Next Page
Loading...
