EasyManua.ls Logo

Samsung UN32C5000QF - Page 69

Samsung UN32C5000QF
139 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4-14
4. Troubleshooting
4-1-6. No Video_Tuner DTV (A Type)
Symptom Audio is normal but no picture is displayed on the screen. -
Major
checkpoints
Check the DTV source. -
Check the Tuner, Check the Chelsea. -
This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected. -
Diagnostics
Does the DC TU5V_PW, TU33V_PW
appear at TP - TUNER_33V, B 5V
Pin of Tuner ?
Check the 'signal strength' in Self Diagnosis
menu Strength is enough ?
Does the digital data appear at
TP - O_TXCLK+, O_TXCLK-,
F_TXCLK+, F_TXCLK- ?
Yes
Yes
Yes
Yes
Yes
Check a set in the 'Stand-by mode'
Input the RF source properly.
Please, Contact Tech support.
Change the Main Assy.
Check the D-TV source.
Check IC301 (SX1).
Change the Main Assy.
No
No
No
No
No
No
Power indicator LED is off.
Lamp(Backlight) on, no video ?
Check the RF source and
check the connection of RF cable ?
Check the LVDS cable?
Check the T-Con B'd?
Replace the LCD panel?
2
Caution Make sure to disconnect the power before working on the IP board.

Other manuals for Samsung UN32C5000QF

Related product manuals